Processing Capacity : 1.9-76 t/h
Main motor: 7.5–160 kw
Material handling: wood, lignite, coal, slime, quartz, sand, slag, limestone, clay, sand, quartz sand, granulating slag, etc.
Sawdust dryer is also known as wood chip dryer or wood shavings dryer. Sawdust dryer machine can conduct both drying and cooling and save more energy than common dryers to save the cost mostly.
Processing Capacity : 1.9-76 t/h
Main motor: 7.5–160 kw
Material handling: wood, lignite, coal, slime, quartz, sand, slag, limestone, clay, sand, quartz sand, granulating slag, etc.
Fote Company support is available worldwide to assist you throughout the life of your FTM Equipment. For answers to your questions or to coordinate a service visit to your plant, please contact Our by Chat Online
Sawdust dryer is also known as wood chip dryer or wood shavings dryer. Sawdust dryer machine can conduct both drying and cooling and save more energy than common dryers to save the cost mostly. It is mainly used to dry large particle materials like ore powder, coal slurry, and coal sawdust in sawdust, vinasse slag, rice husk and other industries.
Common wood chip dryers usually use coal or wood as heat resource which demands high density of labor and high cost. In addition, large thermal efficiency loss makes the heat utilization is less than 30%. Usually the material of which water content is 35% should be dried for 3-4times. However, sawdust dryer can dryer the material of which water content is 35% successfully for one time and save energy by 75%, greatly reducing the costs.
1. More than 10 heat sources are available to choose
Including coal, wood, natural gas, liquefied petroleum gas, diesel, steam, biomass, etc. The selection can be tailored based on the project's environmental requirements and material quality standards.
2. Environmental Dust Removal System
A multi-stage dust removal setup ensures that dust and exhaust gases are treated before discharge, addressing environmental concerns.
3. Excellent Drying Performance
The moisture content of the output can be reduced to below 1%.
FTM Machinery is a famous sawdust dryer manufacturer and supplier with high reputation. There is saw dust dryer for sale. The products made by FTM have high quality, perfect service and reasonable price. You can leave a message or send us an e-mail to get more information about the equipment.
Rotary dryer
Indirect heat transfer dryer
| Spec./m | Shell Cubage | Capacity(t/h) | Installation(%) | Highest Inlet Air Temperature | Main Motor |
| Φ 1.2×8 | 9 | 1.9-2.4 | 3-5 | 700-800 | 7.5 |
| Φ1.2 ×10 | 11.3 | 2.4-3 | 3-5 | 700-800 | 7.5 |
| Φ 1.5×12 | 21.2 | 4.5-5.7 | 3-5 | 700-800 | 15 |
| Φ 1.5×14 | 24.7 | 5.3-6.6 | 3-5 | 700-800 | 15 |
| Φ1.5×15 | 26.5 | 5.7-7.1 | 3-5 | 700-800 | 15 |
| Φ 1.8×12 | 30.5 | 6.5-8.1 | 3-5 | 700-800 | 18.5 |
| Φ 1.8×14 | 35.6 | 7.6-9.5 | 3-5 | 700-800 | 18.5 |
| Φ 2.2×12 | 45.6 | 9.7-12.2 | 3-5 | 700-800 | 22 |
| Φ 2.2×14 | 53.2 | 11.4-14.2 | 3-5 | 700-800 | 22 |
| Φ 2.2×16 | 60.8 | 13-16.2 | 3-5 | 700-800 | 22 |
| Φ 2.4×14 | 63.3 | 13.5-16.9 | 3-5 | 700-800 | 37 |
| Φ 2.4×18 | 81.4 | 17.4-21.7 | 3-5 | 700-800 | 37 |
| Φ 2.4×20 | 90.4 | 19.3-24.1 | 3-5 | 700-800 | 45 |
| Φ 2.4×22 | 99.5 | 21.2-26.5 | 3-5 | 700-800 | 45 |
| Φ 2.6×24 | 127.4 | 27.2-34 | 3-5 | 700-800 | 55 |
| Φ 3×20 | 141.3 | 30.1-37.7 | 3-5 | 700-800 | 75 |
| Φ 3×25 | 176.6 | 37.7-47.1 | 3-5 | 700-800 | 75 |
| Φ 3.2×25 | 201 | 42.9-53.6 | 3-5 | 700-800 | 90 |
| Φ 3.6×28 | 285 | 60.8-76 | 3-5 | 700-800 | 160 |
| Shell diameter × shell Length | Inside diameter of outer shell （mm） |
Inside diameter of inner shell （mm） |
Shell Length （m） |
Shell cubage （m³） |
Shell obliquity | Lifting blade form | Highest inlet air temperature （℃） |
Dimensions （m） |
| Φ1.5×15m | 1500 | 500 | 15 | 20.27 | 3-5% | Lifting form | 850 | 16.2×2.7×2.7 |
| Φ1.5×17m | 17 | 22.97 | 18.2×2.7×2.7 | |||||
| Φ1.5×19m | 19 | 25.68 | 20.0×2.9×2.9 | |||||
| Φ1.8×21m | 1800 | 650 | 21 | 35.91 | 3-5% | Lifting form | 850 | 22.5×2.7×2.7 |
| Φ1.8×23m | 23 | 39.33 | 24.5×2.9×2.9 | |||||
| Φ1.8×25m | 25 | 42.75 | 26.5×2.9×2.9 | |||||
| Φ2.2×21m | 2200 | 800 | 21 | 58.10 | 3-5% | Lifting form | 850 | ---- |
| Φ2.2×23m | 23 | 63.61 | ||||||
| Φ2.2×25m | 25 | 69.15 |
Our customer service team is here to help you 24/7. We can ship you parts, send field service technicians to your site and answer any questions you have. Whatever you need, we are here for you.
Contact Support
NOTE: You can also send a message to us by this email market@sinoftm.com, we will reply to you within 24 hours. Now tell us your needs, there will be more favorable prices!